Showing all 7 results
-
$317.00METAL MAN 130I Inverter 120V Flux Core Welder
The Metal Man FC130i is a 120V powered Inverter Flux Core Wire Welder that is economical and easy to use. Flux Core wire is used for welding steel materials only and requires no shielding gas. This is ideal for outdoor applications where portability is key. The leading edge Inverter Technology prov ides crisp, consistent and powerful welding performance out of this light weight easy to carry unit. Inverter technology creates less heat loss resulting in a higher 30% duty cycle. The FC130i has dial adjustable wire feed speed and
voltage controls and can weld steel from 18 guage to 3/16” thick. Typical applications for this unit include home/hobbyist, construction, farm and ranch and light industrial applications. 1 Year Warranty -
$800.00METAL MAN 220IDV Inverter Dual Voltage Multi Process Welder
METAL MAN 200A Inverter Dual Voltage Multi Process Welder. Flux Core: Yes, MIG: Yes, Stick: Yes, TIG: Yes, Input Power: 120V, 230V.
-
$179.17METAL MAN 80T Inverter 120V Stick Welder
The Metal Man Arc 80T is a DC-only inverter stick welder with an exceptionally smooth stick welding performance in an extremely small package. It is intended for use for stick welding steel, stainless steel, cast iron, and hard surfacing, using electrodes from 1/16 inch to 3/32 inch. It is also capable of Scratch-Start DC TIG Welding on Steel and Stainless Steel with optional ACTT1. 2 Year Warranty
-
$575.00Metal Man MIG 180DVT Dual Voltage Wire Feed Welder
The Metal Man MIG 180DVT is a dual voltage (120V/230V) DC inverter wire feed welder capable of MIG Welding and Flux Core Welding. MIG weld steel up to 5/16” in a single pass (230V). Typical applications for include home/hobbyist, construction, auto repair, farm and ranch and light industrial applications. 1 Year Warranty
-
$550.00Metal Man MP 140T Multi-Process Welder
The MP140T is a 120V DC inverter multi-process welder capable of MIG Welding, Flux Core Welding, DC Stick Welding and Scratch-Start DC TIG Welding with optional ACTT1. MIG weld steel up to 3/16” in a single pass. Add on optional EZFSG2 spoolgun for hard to feed wires such as aluminum. DC stick weld with rods up to 3/32”. Typical applications for include home/hobbyist, construction, auto repair, farm and ranch and light industrial applications. 3 Year Warranty
-
$1,500.00Metal Man MP251I Inverter Multi-Process Welder
The Metal Man MMP251I is an inverter-powered, wire feed welder for flux core and MIG welding plus a DC stick welder. It features a Synergic LCD control that allows the operator to program parameters by process, wire, material, and gases used and can be saved and recalled for future use. It comes complete with a regulator, gas hose a MIG gun, and a ground cable and clamp. An optional electrode holder (MMEH35-70-10FT) is available for DC stick welding and an optional TIG Torch (ACCT2V) for DC lift arc TIG welding. Directly connect this unit to a 230V NEMA 6-50R receptacle. It is designed to weld materials as thin as 24 gauge all the way up to 1/2″ in a single pass The optional Spool Gun (EZFSG2) is capable of welding aluminum with 4″ spools of aluminum wire. This unit can also perform lift start DC TIG welding on steel and stainless steel materials with TIG Torch (ACTT2V) Argon shielding gas and a TIG filler rod would also be required for TIG welding. 3 Year Warranty.
-
$919.46Metal Man Plasma Cutter PC45DV
The Metal Man PC 45DV is a Dual Voltage, DC Inverter Plasma Cutter. It uses new state of the art technology. The output can be adjusted from 15 to 45 Amps. This unit is designed to cut up to 11/16″ steel at a travel speed of 10 inches per minute when operating on 230V AC power. Use the included adapter cord to run this unit off 120V AC power for a cutting capacity on steel of up to 1/4” at a travel speed of 10 inches per minute. It cuts all electrically conductive materials. It cuts a narrow kerf that results in a smaller heat affected zone for reduced warping. The Metal Man PC 45DV is lightweight (22.58 lbs.), compact, inverter design for greater portability. It has a pilot arc for easy starts and enables the user to cut fence or expanded metal. This unit has a built-in air pressure adjustment and gauge, indicator lights for quick trouble shooting and thermal overload protection and now features a built-in water separator. 2 Year Warranty