Showing 181–210 of 364 results

  • Magnolia Brush 42 10″ Utility / Fender Green Flagged Foam Plastic Brush

    Filling material is staple set in a high-tensile strength foam plastic block. Will not absorb water. Recommended for use where sanitation is required.

    $5.25
  • Magnolia Brush 43 22″ Utility / Fender Green Flagged Foam Plastic Brush

    Filling material is staple set in a high-tensile strength foam plastic block. Will not absorb water. Recommended for use where sanitation is required. Grey & White Flagged Plastic is staple set in a 22” foam plastic handle bent at a slight angle to easily clean around wheels and fenders.

    $9.00
  • Magnolia Brush 6-BP Brass Wire Side Wall Brush

    Brass Wire Foam Plastic. Filling material is staple set in foam plastic block that will not crack when left in tire cleaning solution.

    $6.07
  • Magnolia Brush 6-NP White Side Wall Brush

    White Nylon Foam Plastic. Filling material is staple set in foam plastic block that will not crack when left in tire cleaning solution.

    $3.00
  • Magnolia Brush 65 Automobile Upholstry & Floor Mat Brush – Stiff Plastic

    Fiber is staple set in a polypropylene block with an upturned handle. Brush is trimmed flat. Recommended for upholstry and floor mats.

    $4.40
  • Magnolia Brush 71-N Fender / Utlility White Nylon Short Plastic Brush

    Filling material is staple set in a polypropylene block. Will not break or crack. Will not absorb water. Angled handle prevents scraped knuckles. Recommended for use in the food industry. Not recommended for use in acid solutions.

    $8.00
  • Markal Valve Action White and Yellow Paint Marker

    Markal Valve White Paint Markers-12 Markers

    Certified Safe for use on Stainless steal & in nuclear applications. Meets MIL-STD-2041D, EDF PMUC, RDT-F-7-3T, & Navy C3070 specifications. Xylene-free formula.

    $69.08
  • Markal Valve Action White and Yellow Paint Marker

    Markal Valve Yellow Paint Markers-12 Markers

    Certified Safe for use on Stainless steal & in nuclear applications. Meets MIL-STD-2041D, EDF PMUC, RDT-F-7-3T, & Navy C3070 specifications. Xylene-free formula.

    $69.08
  • MCR SAFETY GOGGLES 2120

    MCR Safety Goggles are rugged polycarbonate lens filters 99.9% of harmful U.V. rays Exclusive Duramass® scratch resistant coating.

    $2.25
  • Metal Man Auto Darkening Welding Helmet – Black

    The AB8100SC auto-darkening welding helmet uses two CR1025 replaceable batteries for initial lens darkening and then Runs off solar power or light from the welding arc. It features 2 arc sensors and a 3.62 in. x 1.36 in. viewing area. Adjust your shade control from 9 to 13. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man AB8100SC Auto-Darkening helmet is safe, functional, and attractive to users. 1 year warranty.

    $88.00
  • METAL MAN 130I Inverter 120V Flux Core Welder

    The Metal Man FC130i is a 120V powered Inverter Flux Core Wire Welder that is economical and easy to use. Flux Core wire is used for welding steel materials only and requires no shielding gas. This is ideal for outdoor applications where portability is key. The leading edge Inverter Technology prov ides crisp, consistent and powerful welding performance out of this light weight easy to carry unit. Inverter technology creates less heat loss resulting in a higher 30% duty cycle. The FC130i has dial adjustable wire feed speed and
    voltage controls and can weld steel from 18 guage to 3/16” thick. Typical applications for this unit include home/hobbyist, construction, farm and ranch and light industrial applications. 1 Year Warranty

    $317.00
  • Metal Man 2 Piece Air Cooled Tig Torch 17V style with 10MM Dinse Connector

    Two Piece Air Cooled Tig Torch 17V style with 10MM Dinse Connector

    $95.00
  • METAL MAN 220IDV Inverter Dual Voltage Multi Process Welder

    METAL MAN 200A Inverter Dual Voltage Multi Process Welder. Flux Core: Yes, MIG: Yes, Stick: Yes, TIG: Yes, Input Power: 120V, 230V.

    $800.00
  • METAL MAN 80T Inverter 120V Stick Welder

    The Metal Man Arc 80T is a DC-only inverter stick welder with an exceptionally smooth stick welding performance in an extremely small package. It is intended for use for stick welding steel, stainless steel, cast iron, and hard surfacing, using electrodes from 1/16 inch to 3/32 inch. It is also capable of Scratch-Start DC TIG Welding on Steel and Stainless Steel with optional ACTT1. 2 Year Warranty

    $179.17
  • Metal Man AOC8735SGC Big Window 8735 Auto Darkening Welding Helmet – True Timber Camo

    Metal Man AOC8735SGC Big Window 8735 Auto Darkening Welding Helmet. The 8735SGC True Timber Camo auto-darkening welding helmet uses a CR25450 replaceable battery for initial lens darkening and then Runs off solar power or light from the welding arc. It features 4 arc sensors and a BIG viewing area of 3.78 in. x 2.09 in. This unit features our Opticlear 2.5 lens technology for a lighter light state and clearer colors while welding. Adjust your shade control from 9 to 13 or put it in Grind mode to prevent darkening while grinding. Made to fit right, it features adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man 8735SGC Series Auto-Darkening helmet is safe, functional, and attractive to users. 2 year warranty.

    $107.25
  • Metal Man Auto Darkening Welding Helmet – Blue Skull

    The Metal Man “Blue Skull” 9-13 Variable Shade Auto-Darkening welding helmet plus Grind Mode features is a light weight/comfortable design with the graphics to show your style. It uses two AAA replaceable batteries for initial lens darkening and then Runs off solar power or light from the welding arc. It features 2 arc sensors and a 3.86” x 1.73” viewing area. Adjust your shade control from 9 to 13. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man ASF8650SGC Auto-Darkening helmet is safe, functional, and attractive to users. 2 year warranty.

    $110.00
  • Metal Man Auto Darkening Welding Helmet – Military

    The Metal Man “Military” 9-13 Variable Shade Auto Darkening welding helmet plus Grind Mode features a light weight/comfortable design with the graphics to show your style. It uses two AAA replaceable batteries for initial lens darkening and then runs off solar power or light from the welding arc. It features 2 arc sensors and a 3.86″ x 1.73″ viewing area. Adjust your shade control from 9 to 13. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man AM8725SGC Auto-Darkening helmet is safe, functional, and attractive to users. 2 year warranty.

    $110.00
  • Metal Man Auto Darkening Welding Helmet – Red Real Flame

    The Metal Man “Real Flame” 9-13 Variable Shade Auto-Darkening welding helmet plus Grind Mode features a light weight/comfortable design with the graphics to show your style. It uses a sealed non-replaceable lithium battery for the intial lens darkening and then Runs off solar power or light from the welding arc. It features 2 arc sensors and a 3.86” x 1.73” viewing area. Adjust your shade control from 9 to 13. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man ARF8550SGC Auto-Darkening helmet is safe, functional, and attractive to users. 1 year warranty.

    $95.00
  • Metal Man Big Window 8735 Auto Darkening Welding Helmet – Gray Techo Skull

    The 8735SGC auto-darkening welding helmet uses a CR25450 replaceable battery for initial lens darkening and then Runs off solar power or light from the welding arc. It features 4 arc sensors and an BIG viewing area of 3.78 in. x 2.09 in. Adjust your shade control from 9 to 13 or put it in Grind mode to prevent darkening while grinding. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man 8735SGC Series Auto-Darkening helmet is safe, functional, and attractive to users. 2 year warranty.

    $125.00
  • Metal Man Big Window 8735 Auto Darkening Welding Helmet – Black

    The 8735SGC auto-darkening welding helmet uses a CR25450 replaceable battery for initial lens darkening and then Runs off solar power or light from the welding arc. It features 4 arc sensors and an BIG viewing area of 3.78 in. x 2.09 in. This unit features our Opticlear 2.5 lens technology for a lighter light state and clearer colors while welding. Adjust your shade control from 9 to 13 or put it in Grind mode to prevent darkening while grinding. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man 8735SGC Series Auto-Darkening helmet is safe, functional, and attractive to users. 2 year warranty.

    $115.00
  • Metal Man Big Window 8735 Auto Darkening Welding Helmet – Patriotic

    The 8735SGC auto-darkening welding helmet uses a CR25450 replaceable battery for initial lens darkening and then Runs off solar power or light from the welding arc. It features 4 arc sensors and an BIG viewing area of 3.78 in. x 2.09 in. This unit features our Opticlear 2.5 lens technology for a lighter light state and clearer colors while welding. Adjust your shade control from 9 to 13 or put it in Grind mode to prevent darkening while grinding. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man 8735SGC Series Auto-Darkening helmet is safe, functional, and attractive to users. 2 year warranty

    $125.00
  • Metal Man Big Window 8735 Auto Darkening Welding Helmet – Purple/Green Flame

    APG8735SGC – 8735SGC auto-darkening welding helmet uses a CR25450 replaceable battery for initial lens darkening and then Runs off solar power or light from the welding arc. It features 4 arc sensors and an BIG viewing area of 3.78 in. x 2.09 in. This unit features our Opticlear 2.5 lens technology for a lighter light state and clearer colors while welding. Adjust your shade control from 9 to 13 or put it in Grind mode to prevent darkening while grinding. Made to fit right, it features an adjustable headgear to allow you to make it fit your way. With ANSI and CSA approval, the Metal Man 8735SGC Series Auto-Darkening helmet is safe, functional, and attractive to users. 2 year warranty.

    $125.00
  • Metal Man Deluxe Steel Folding Weld Table

    The Metal Man Deluxe Folding Weld Table provides a quick and easy work surface for welding projects. Designed to quickly and easily fold up, this weld table provides a flexible work surface and is easy to store. The work surface measures 36 inches wide and 20 inches deep. In the middle of the work surface is a heavy wire grate designed to allow debris to fall through to the removable collection tray below. The Deluxe Weld Table is perfect for mobile welding applications, maintenance departments or anywhere space is a premium. 90 Day Warranty

    $200.00
  • Metal Man Deluxe Welding Cabinet

    The Deluxe Welding Cabinet provides an integrated all-in-one management solution for portable welders and plasma cutters. It is designed to have your equipment set on the top shelf, and store your cylinder of shielding gas on the back rack. The four storage drawers of varying sizes are convenient storage of all your welding tools and supplies. Cable holders provide easy storage of welding cables. 90 Day Warranty

    $315.00
  • Metal Man Heavy Duty Single/Dual Bottle Welding Cart

    The METAL MAN Heavy Duty Single/Dual Bottle Welding Cart is designed for multiple uses. It can be used to hold portable wire welders, plasma cutters and TIG welders along with the bottle of shielding gas needed for that application. The on-board cylinder rack secures 2 gas cylinders up to 7 inches in diameter (150 CF) or one gas cylinder up to 10 inches in diameter (300 CF) . This cart has shelf clearance to hold multiple welders or can be configured to hold an inverter-based power source with separate feeder. 90 Day Warranty.

    $193.00
  • METAL MAN MEDIUM CYLINDER CART

    The Metal Man CCMD medium cylinder cart is easy to assemble and holds up to 9-1/4″ acetylene and 7-1/2″ oxygen cylinders. This unit comes in two subassemblies for easy boxed shipping, and is quickly assembled with 4 nuts and bolts, one axle with two washers, and two cotter pins. This cart features a “T” style handle and 7″ wheels that make it easy to maneuver. The handy storage box has a cover to keep all your tools and supplies out of the weather.

    $199.00
  • Metal Man MIG 180DVT Dual Voltage Wire Feed Welder

    The Metal Man MIG 180DVT is a dual voltage (120V/230V) DC inverter wire feed welder capable of MIG Welding and Flux Core Welding. MIG weld steel up to 5/16” in a single pass (230V). Typical applications for include home/hobbyist, construction, auto repair, farm and ranch and light industrial applications. 1 Year Warranty

    $575.00
  • Metal Man MP 140T Multi-Process Welder

    The MP140T is a 120V DC inverter multi-process welder capable of MIG Welding, Flux Core Welding, DC Stick Welding and Scratch-Start DC TIG Welding with optional ACTT1. MIG weld steel up to 3/16” in a single pass. Add on optional EZFSG2 spoolgun for hard to feed wires such as aluminum. DC stick weld with rods up to 3/32”. Typical applications for include home/hobbyist, construction, auto repair, farm and ranch and light industrial applications. 3 Year Warranty

    $550.00
  • Metal Man MP251I Inverter Multi-Process Welder

    The Metal Man MMP251I is an inverter-powered, wire feed welder for flux core and MIG welding plus a DC stick welder. It features a Synergic LCD control that allows the operator to program parameters by process, wire, material, and gases used and can be saved and recalled for future use. It comes complete with a regulator, gas hose a MIG gun, and a ground cable and clamp. An optional electrode holder (MMEH35-70-10FT) is available for DC stick welding and an optional TIG Torch (ACCT2V) for DC lift arc TIG welding. Directly connect this unit to a 230V NEMA 6-50R receptacle. It is designed to weld materials as thin as 24 gauge all the way up to 1/2″ in a single pass The optional Spool Gun (EZFSG2) is capable of welding aluminum with 4″ spools of aluminum wire. This unit can also perform lift start DC TIG welding on steel and stainless steel materials with TIG Torch (ACTT2V) Argon shielding gas and a TIG filler rod would also be required for TIG welding. 3 Year Warranty.

    $1,500.00
  • Metal Man Plasma Cutter PC45DV

    The Metal Man PC 45DV is a Dual Voltage, DC Inverter Plasma Cutter. It uses new state of the art technology. The output can be adjusted from 15 to 45 Amps. This unit is designed to cut up to 11/16″ steel at a travel speed of 10 inches per minute when operating on 230V AC power. Use the included adapter cord to run this unit off 120V AC power for a cutting capacity on steel of up to 1/4” at a travel speed of 10 inches per minute. It cuts all electrically conductive materials. It cuts a narrow kerf that results in a smaller heat affected zone for reduced warping. The Metal Man PC 45DV is lightweight (22.58 lbs.), compact, inverter design for greater portability. It has a pilot arc for easy starts and enables the user to cut fence or expanded metal. This unit has a built-in air pressure adjustment and gauge, indicator lights for quick trouble shooting and thermal overload protection and now features a built-in water separator. 2 Year Warranty

    $919.46